add useful and used scripts

.local/bin/camtoggle

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+#pkill -f /dev/video || mpv --no-osc --no-input-default-bindings --input-conf=/dev/null --demuxer-lavf-format=v4l2 --geometry=-0-0 --autofit=30% --title="mpvfloat" --profile=low-latency --untimed /dev/video0
+
+onecam() {
+	mpv --no-osc --no-input-default-bindings --input-conf=/dev/null mpv --demuxer-lavf-format=v4l2 --geometry=-0-0 --autofit=30% --title="mpvfloat" --profile=low-latency --untimed $1
+	}
+
+#Get all possible cameras
+allposs=$(v4l2-ctl --list-devices | sed ':a;N;$!ba;s/):\n/):/g')
+cameras=$(echo "$allposs" | awk '/):/ {print $1}')
+
+# If there's only one camera
+[ "$(echo "$cameras" | wc -l)" -lt 2 ] &&
+	{ input=$(v4l2-ctl --list-devices | sed -n "/^$cameras/,/video*/p" | tail -n 1 | awk '{print $1}') ; onecam "$input"; exit ;}
+
+chosen=$(echo "$cameras" | dmenu -i -p "Which camera ?")
+input=$(v4l2-ctl --list-devices | sed -n "/^$chosen/,/video*/p" | tail -n 1 | awk '{print $1}')
+
+onecam "$input"

.local/bin/displayselect

@@ -0,0 +1,80 @@
+#!/bin/sh
+
+# A UI for detecting and selecting all displays. Probes xrandr for connected
+# displays and lets user select one to use. User may also select "manual
+# selection" which opens arandr.
+
+twoscreen() { # If multi-monitor is selected and there are two screens.
+
+    mirror=$(printf "no\\nyes" | dmenu -i -p "Mirror displays?")
+    # Mirror displays using native resolution of external display and a scaled
+    # version for the internal display
+    if [ "$mirror" = "yes" ]; then
+        external=$(echo "$screens" | dmenu -i -p "Optimize resolution for:")
+        internal=$(echo "$screens" | grep -v "$external")
+
+        res_external=$(xrandr --query | sed -n "/^$external/,/\+/p" | tail -n 1 | awk '{print $1}')
+        res_internal=$(xrandr --query | sed -n "/^$internal/,/\+/p" | tail -n 1 | awk '{print $1}')
+
+        res_ext_x=$(echo "$res_external" | sed 's/x.*//')
+        res_ext_y=$(echo "$res_external" | sed 's/.*x//' | sed 's/i//')
+        res_int_x=$(echo "$res_internal" | sed 's/x.*//')
+        res_int_y=$(echo "$res_internal" | sed 's/.*x//' | sed 's/i//')
+
+        scale_x=$(echo "$res_ext_x / $res_int_x" | bc -l)
+        scale_y=$(echo "$res_ext_y / $res_int_y" | bc -l)
+
+        xrandr --output "$external" --auto --scale 1.0x1.0 --output "$internal" --auto --same-as "$external" --scale "$scale_x"x"$scale_y"
+    else
+
+        primary=$(echo "$screens" | dmenu -i -p "Select primary display:")
+        secondary=$(echo "$screens" | grep -v "$primary")
+        direction=$(printf "left-of\\nright-of\\nabove\\nbelow" | dmenu -i -p "What side of $primary should $secondary be on?")
+        xrandr --output "$primary" --auto --scale 1.0x1.0 --output "$secondary" --"$direction" "$primary" --auto --scale 1.0x1.0
+    fi
+    }
+
+morescreen() { # If multi-monitor is selected and there are more than two screens.
+	primary=$(echo "$screens" | dmenu -i -p "Select primary display:")
+	secondary=$(echo "$screens" | grep -v "$primary" | dmenu -i -p "Select secondary display:")
+	direction=$(printf "left-of\\nright-of\\nabove\\nbelow" | dmenu -i -p "What side of $primary should $secondary be on?")
+	tertiary=$(echo "$screens" | grep -v "$primary" | grep -v "$secondary" | dmenu -i -p "Select third display:")
+	direction2=$(printf "left-of\\nright-of\\nabove\\nbelow" | dmenu -i -p "What side of $secondary should $tertiary be on?")
+	xrandr --output "$primary" --auto --output "$secondary" --"$direction" "$primary" --auto --output "$tertiary" --"$direction2" "$primary" --auto
+	}
+
+multimon() { # Multi-monitor handler.
+	case "$(echo "$screens" | wc -l)" in
+		2) twoscreen ;;
+		*) morescreen ;;
+	esac ;}
+
+onescreen() { # If only one output available or chosen.
+	xrandr --output "$1" --auto --scale 1.0x1.0 $(echo "$allposs" | grep -v "$1" | awk '{print "--output", $1, "--off"}' | paste -sd ' ')
+	}
+
+postrun() { # Stuff to run to clean up.
+	setbg		# Fix background if screen size/arangement has changed.
+	remaps		# Re-remap keys if keyboard added (for laptop bases)
+	{ killall dunst ; setsid -f dunst ;} >/dev/null 2>&1 # Restart dunst to ensure proper location on screen
+	}
+
+# Get all possible displays
+allposs=$(xrandr -q | grep "connected")
+
+# Get all connected screens.
+screens=$(echo "$allposs" | awk '/ connected/ {print $1}')
+
+# If there's only one screen
+[ "$(echo "$screens" | wc -l)" -lt 2 ] &&
+	{ onescreen "$screens"; postrun; notify-send "💻 Only one screen detected." "Using it in its optimal settings...";  exit ;}
+
+# Get user choice including multi-monitor and manual selection:
+chosen=$(printf "%s\\nmulti-monitor\\nmanual selection" "$screens" | dmenu -i -p "Select display arangement:") &&
+case "$chosen" in
+	"manual selection") arandr ; exit ;;
+	"multi-monitor") multimon ;;
+	*) onescreen "$chosen" ;;
+esac
+
+postrun

.local/bin/mounter

@@ -0,0 +1,105 @@
+#!/bin/bash
+
+# Mounts Android Phones and USB drives (encrypted or not). This script will
+# replace the older `dmenumount` which had extra steps and couldn't handle
+# encrypted drives.
+# TODO: Remove already mounted Android phones from prompt.
+# TODO: Try decrypt for drives in crtypttab
+# TODO: Add some support for connecting iPhones (although they are annoying).
+
+set -e
+
+# Check for phones.
+phones="$(simple-mtpfs -l 2>/dev/null | sed "s/^/📱/")"
+# Check for drives.
+lsblkoutput="$(lsblk -rpo "uuid,name,type,size,label,mountpoint,fstype")"
+# Get all LUKS drives
+allluks="$(echo "$lsblkoutput" | grep crypto_LUKS)" || true
+# Get a list of the LUKS drive UUIDs already decrypted.
+decrypted="$(find /dev/disk/by-id/dm-uuid-CRYPT-LUKS2-* | sed "s|.*LUKS2-||;s|-.*||")" || true
+# Functioning for formatting drives correctly for dmenu:
+filter() { sed "s/ /:/g" | awk -F':' '$7==""{printf "%s%s (%s) %s\n",$1,$3,$5,$6}' ; }
+
+# Get only LUKS drives that are not decrypted.
+IFS='
+'
+unopenedluks="$(for drive in $allluks; do
+	uuid="${drive%% *}"
+	uuid="${uuid//-}"	# This is a bashism.
+	for open in $decrypted; do
+		[ "$uuid" = "$open" ] && break 1
+	done && continue 1
+	echo "🔒 $drive"
+done | filter)"
+
+# Get all normal, non-encrypted or decrypted partitions that are not mounted.
+normalparts="$(echo "$lsblkoutput"| grep -v crypto_LUKS | grep 'part\|rom\|crypt' | sed "s/^/💾 /" | filter )"
+
+# Add all to one variable. If no mountable drives found, exit.
+alldrives="$(echo "$phones
+$unopenedluks
+$normalparts" | sed "/^$/d;s/ *$//")"
+test -n "$alldrives"
+
+# Feed all found drives to dmenu and get user choice.
+chosen="$(echo "$alldrives" | dmenu -p "Mount which drive?" -i)"
+
+# Function for prompting user for a mountpoint.
+getmount(){
+	mp="$(find /mnt /media /mount /home -maxdepth 1 -type d 2>/dev/null | dmenu -i -p "Mount this drive where?")"
+	test -n "$mp"
+	if [ ! -d "$mp" ]; then
+		mkdiryn=$(printf "No\\nYes" | dmenu -i -p "$mp does not exist. Create it?")
+		[ "$mkdiryn" = "Yes" ] && (mkdir -p "$mp" || sudo -A mkdir -p "$mp")
+	fi
+}
+
+attemptmount(){
+		# Attempt to mount without a mountpoint, to see if drive is in fstab.
+		sudo -A mount "$chosen" || return 1
+		notify-send "💾Drive Mounted." "$chosen mounted."
+		exit
+}
+
+case "$chosen" in
+	💾*)
+		chosen="${chosen%% *}"
+		chosen="${chosen:1}"	# This is a bashism.
+		attemptmount || getmount
+		partitiontype="$(lsblk -no "fstype" "$chosen")"
+		case "$partitiontype" in
+			"vfat") sudo -A mount -t vfat "$chosen" "$mp" -o rw,umask=0000;;
+			*) sudo -A mount "$chosen" "$mp"; user="$(whoami)"; ug="$(groups | awk '{print $1}')"; sudo -A chown "$user":"$ug" "$mp";;
+		esac
+		# sudo -A mount "$chosen" "$mp" -o uid="$(id -u)",gid="$(id -g)"
+		notify-send "💾Drive Mounted." "$chosen mounted to $mp."
+		;;
+
+	🔒*)
+		chosen="${chosen%% *}"
+		chosen="${chosen:1}"	# This is a bashism.
+		# Number the drive.
+		while true; do
+			[ -f "/dev/mapper/usb$num" ] || break
+			num="$(printf "%02d" "$((num +1))")"
+		done
+
+		# Decrypt in a terminal window
+		${TERMINAL:-st} -n floatterm -g 60x1 -e sudo cryptsetup open "$chosen" "usb$num"
+		# Check if now decrypted.
+		test -b "/dev/mapper/usb$num"
+
+		attemptmount || getmount
+		sudo -A mount "/dev/mapper/usb$num" "$mp" -o uid="$(id -u)",gid="$(id -g)"
+		notify-send "🔓Decrypted drive Mounted." "$chosen decrypted and mounted to $mp."
+		;;
+
+	📱*)
+		notify-send "❗Note" "Remember to allow file access on your phone now."
+		getmount
+		chosen="${chosen%%:*}"
+		chosen="${chosen:1}"	# This is a bashism.
+		sudo -A simple-mtpfs -o allow_other --device "$chosen" "$mp"
+		notify-send "🤖 Android Mounted." "Android device mounted to $mp."
+		;;
+esac

.local/bin/pauseallmpv

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+# You might notice all mpv commands are aliased to have this input-ipc-server
+# thing. That's just for this particular command, which allows us to pause
+# every single one of them with one command! This is bound to super + shift + p
+# (with other things) by default and is used in some other places.
+
+for i in $(ls /tmp/mpvSockets/*); do
+	echo '{ "command": ["set_property", "pause", true] }' | socat - "$i";
+done

.local/bin/queueandnotify

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# Podboat sucks. This script replaces it.
+# It reads the newsboat queue, queuing downloads with taskspooler.
+# It also removes the junk from extentions.
+queuefile="${XDG_DATA_HOME:-$HOME/.local/share}/newsboat/queue"
+
+while read -r line; do
+	[ -z "$line" ] && continue
+	url="$(echo "$line" | awk '{print $1}')"
+	qndl "$url" "curl -LO"
+done < "$queuefile"
+
+echo > "$queuefile"

.local/bin/remaps

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# This script is called on startup to remap keys.
+# Increase key speed via a rate change
+xset r rate 300 50
+# Map the caps lock key to super...
+setxkbmap -option caps:super
+# But when it is pressed only once, treat it as escape.
+killall xcape 2>/dev/null ; xcape -e 'Super_L=Escape'
+# Map the menu button to right super as well.
+xmodmap -e 'keycode 135 = Super_R'
+
+# Map the multimedia button
+xmodmap -e 'keycode 179 = XF86AudioMedia NoSymbol XF86AudioMedia'

.local/bin/rssadd

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+! echo "$1" | grep "https*://\S\+\.[A-Za-z]\+\S*" >/dev/null &&
+	notify-send "That doesn't look like a full URL." && exit
+RSSFILE="${XDG_CONFIG_HOME:-$HOME/.config}/newsboat/urls"
+if awk '{print $1}' "$RSSFILE" | grep "^$1$" >/dev/null; then
+	notify-send "You already have this RSS feed."
+else
+	echo "$1" >> "$RSSFILE" && notify-send "RSS feed added."
+fi

.local/bin/setbg

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+# This script does the following:
+#	Run by itself, set the wallpaper (at X start).
+#	If given a file, set that as the new wallpaper.
+#	If given a directory, choose random file in it.
+#	If wal is installed, also generates a colorscheme.
+
+# Location of link to wallpaper link.
+bgloc="${XDG_DATA_HOME:-$HOME/.local/share/}/bg"
+
+[ -f "$1" ] && ln -sf "$(readlink -f "$1")" "$bgloc" && notify-send -i "$bgloc" "Changing wallpaper..."
+
+[ -d "$1" ] && ln -sf "$(find "$(readlink -f "$1")" -iregex '.*.\(jpg\|jpeg\|png\|gif\)' -type f | shuf -n 1)" "$bgloc" && notify-send -i "$bgloc" "Random Wallpaper chosen."
+
+# If pywal is installed, use it.
+wal -i "$(readlink -f "$bgloc")" -o "${XDG_CONFIG_HOME:-$HOME/.config}/wal/postrun" >/dev/null 2>&1
+
+pidof dwm >/dev/null && xdotool key super+F12
+xwallpaper --zoom "$bgloc"

.local/bin/shortcuts

@@ -0,0 +1,31 @@
+#!/bin/sh
+
+# Output locations. Unactivated progs should go to /dev/null.
+shell_shortcuts="${XDG_CONFIG_HOME:-$HOME/.config}/shell/shortcutrc"
+zsh_named_dirs="${XDG_CONFIG_HOME:-$HOME/.config}/shell/zshnameddirrc"
+ranger_shortcuts="${XDG_CONFIG_HOME:-$HOME/.config}/ranger/shortcuts.conf"
+qute_shortcuts="/dev/null"
+fish_shortcuts="/dev/null"
+vifm_shortcuts="/dev/null"
+
+# Remove, prepare files
+rm -f "$ranger_shortcuts" "$qute_shortcuts" "$zsh_named_dirs" 2>/dev/null
+printf "# vim: filetype=sh\\n" > "$fish_shortcuts"
+printf "# vim: filetype=sh\\nalias " > "$shell_shortcuts"
+printf "\" vim: filetype=vim\\n" > "$vifm_shortcuts"
+
+# Format the `directories` file in the correct syntax and sent it to all three configs.
+awk "!/^\s*#/ && !/^\s*\$/ {gsub(\"\\\s*#.*$\",\"\");
+    printf(\"%s=\42cd %s && ls -a\42 \\\\\n\",\$1,\$2)   >> \"$shell_shortcuts\" ;
+    printf(\"hash -d %s=%s \n\",\$1,\$2)                 >> \"$zsh_named_dirs\"  ;
+    printf(\"abbr %s \42cd %s; and ls -a\42\n\",\$1,\$2) >> \"$fish_shortcuts\"  ;
+    printf(\"map g%s :cd %s<CR>\nmap t%s <tab>:cd %s<CR><tab>\nmap M%s <tab>:cd %s<CR><tab>:mo<CR>\nmap Y%s <tab>:cd %s<CR><tab>:co<CR> \n\",\$1,\$2, \$1, \$2, \$1, \$2, \$1, \$2)       >> \"$vifm_shortcuts\" ;
+    printf(\"config.bind(';%s', \42set downloads.location.directory %s ;; hint links download\42) \n\",\$1,\$2) >> \"$qute_shortcuts\" ;
+    printf(\"map g%s cd %s\nmap t%s tab_new %s\nmap m%s shell mv -v %%s %s\nmap Y%s shell cp -rv %%s %s \n\",\$1,\$2,\$1,\$2, \$1, \$2, \$1, \$2) >> \"$ranger_shortcuts\" }" "${XDG_CONFIG_HOME:-$HOME/.config}/shell/bm-dirs"
+
+# Format the `files` file in the correct syntax and sent it to both configs.
+awk "!/^\s*#/ && !/^\s*\$/ {gsub(\"\\\s*#.*$\",\"\");
+    printf(\"%s=\42\$EDITOR %s\42 \\\\\n\",\$1,\$2)  >> \"$shell_shortcuts\" ;
+	printf(\"abbr %s \42\$EDITOR %s\42 \n\",\$1,\$2) >> \"$fish_shortcuts\"  ;
+	printf(\"map %s :e %s<CR> \n\",\$1,\$2)          >> \"$vifm_shortcuts\"  ;
+	printf(\"map %s shell \$EDITOR %s \n\",\$1,\$2)  >> \"$ranger_shortcuts\" }" "${XDG_CONFIG_HOME:-$HOME/.config}/shell/bm-files"

.local/bin/statusbar/sb-battery

@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# Prints all batteries, their percentage remaining and an emoji corresponding
+# to charge status (🔌 for plugged up, 🔋 for discharging on battery, etc.).
+
+case $BLOCK_BUTTON in
+	3) notify-send "🔋 Battery module" "🔋: discharging
+🛑: not charging
+♻: stagnant charge
+🔌: charging
+⚡: charged
+- Scroll to change adjust xbacklight." ;;
+	4) xbacklight -inc 10 ;;
+	5) xbacklight -dec 10 ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+# acpi alternative
+acpi | sed "s/Battery [0-9]: //;s/[Dd]ischarging, /🔋/;s/[Nn]ot charging, /🛑/;s/[Cc]harging, /🔌/;s/[Uu]nknown, /♻️/;s/[Ff]ull, /⚡/;s/ \(remaining\|until charged\)//"; exit
+done | sed 's/ *$//'
+
+# Loop through all attached batteries and format the info
+# for battery in /sys/class/power_supply/BAT?*; do
+# 	# If non-first battery, print a space separator.
+# 	[ -n "${capacity+x}" ] && printf " "
+# 	# Sets up the status and capacity
+# 	case "$(cat "$battery/status")" in
+# 		"Full") status="⚡" ;;
+# 		"Discharging") status="🔋" ;;
+# 		"Charging") status="🔌" ;;
+# 		"Not charging") status="🛑" ;;
+# 		"Unknown") status="♻️" ;;
+# 	esac
+# 	capacity=$(cat "$battery/capacity")
+# 	# Will make a warn variable if discharging and low
+# 	[ "$status" = "🔋" ] && [ "$capacity" -le 25 ] && warn="❗"
+# 	# Prints the info
+# 	printf "%s%s%d%%" "$status" "$warn" "$capacity"; unset warn
+# done && exit 0

.local/bin/statusbar/sb-clock

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+clock=$(date '+%I')
+
+case "$clock" in
+	"00") icon="🕛" ;;
+	"01") icon="🕐" ;;
+	"02") icon="🕑" ;;
+	"03") icon="🕒" ;;
+	"04") icon="🕓" ;;
+	"05") icon="🕔" ;;
+	"06") icon="🕕" ;;
+	"07") icon="🕖" ;;
+	"08") icon="🕗" ;;
+	"09") icon="🕘" ;;
+	"10") icon="🕙" ;;
+	"11") icon="🕚" ;;
+	"12") icon="🕛" ;;
+esac
+
+case $BLOCK_BUTTON in
+	1) notify-send "This Month" "$(cal -m --color=always | sed "s/..7m/<b><span color=\"red\">/;s/..27m/<\/span><\/b>/")" && notify-send "Appointments" "$(calcurse -d3)" ;;
+	2) setsid -f "$TERMINAL" -e calcurse ;;
+	3) notify-send "📅 Time/date module" "\- Left click to show upcoming appointments for the next three days via \`calcurse -d3\` and show the month via \`cal\`
+- Middle click opens calcurse if installed" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+date "+%d %b %Y (%a) $icon%H:%M"

.local/bin/statusbar/sb-cpu

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+case $BLOCK_BUTTON in
+	1) notify-send "🖥 CPU hogs" "$(ps axch -o cmd:15,%cpu --sort=-%cpu | head)\\n(100% per core)" ;;
+	2) setsid -f "$TERMINAL" -e htop ;;
+	3) notify-send "🖥 CPU module " "\- Shows CPU temperature.
+- Click to show intensive processes.
+- Middle click to open htop." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+sensors | awk '/Core 0/ {print "🌡" $3}'

.local/bin/statusbar/sb-cpubars

@@ -0,0 +1,44 @@
+#!/bin/sh
+
+# Module showing CPU load as a changing bars.
+# Just like in polybar.
+# Each bar represents amount of load on one core since
+# last run.
+
+# Cache in tmpfs to improve speed and reduce SSD load
+cache=/tmp/cpubarscache
+
+case $BLOCK_BUTTON in
+	2) setsid -f "$TERMINAL" -e htop ;;
+	3) notify-send "🪨 CPU load module" "Each bar represents
+one CPU core";;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+# id total idle
+stats=$(awk '/cpu[0-9]+/ {printf "%d %d %d\n", substr($1,4), ($2 + $3 + $4 + $5), $5 }' /proc/stat)
+[ ! -f $cache ] && echo "$stats" > "$cache"
+old=$(cat "$cache")
+printf "🪨"
+echo "$stats" | while read -r row; do
+	id=${row%% *}
+	rest=${row#* }
+	total=${rest%% *}
+	idle=${rest##* }
+
+	case "$(echo "$old" | awk '{if ($1 == id)
+		printf "%d\n", (1 - (idle - $3)  / (total - $2))*100 /12.5}' \
+		id="$id" total="$total" idle="$idle")" in
+
+		"0") printf "▁";;
+		"1") printf "▂";;
+		"2") printf "▃";;
+		"3") printf "▄";;
+		"4") printf "▅";;
+		"5") printf "▆";;
+		"6") printf "▇";;
+		"7") printf "█";;
+		"8") printf "█";;
+	esac
+done; printf "\\n"
+echo "$stats" > "$cache"

.local/bin/statusbar/sb-disk

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+# Status bar module for disk space
+# $1 should be drive mountpoint, otherwise assumed /.
+
+location=${1:-/}
+
+[ -d "$location" ] || exit
+
+case $BLOCK_BUTTON in
+	1) notify-send "💽 Disk space" "$(df -h --output=target,used,size)" ;;
+	3) notify-send "💽 Disk module" "\- Shows used hard drive space.
+- Click to show all disk info." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+case "$location" in
+	"/home"* ) icon="🏠" ;;
+	"/mnt"* ) icon="💾" ;;
+	*) icon="🖥";;
+esac
+
+printf "%s: %s\n" "$icon" "$(df -h "$location" | awk ' /[0-9]/ {print $3 "/" $2}')"

.local/bin/statusbar/sb-forecast

@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# Displays todays precipication chance (☔) and daily low (🥶) and high (🌞).
+# Usually intended for the statusbar.
+
+# If we have internet, get a weather report from wttr.in and store it locally.
+# You could set up a shell alias to view the full file in a pager in the
+# terminal if desired. This function will only be run once a day when needed.
+weatherreport="${XDG_DATA_HOME:-$HOME/.local/share}/weatherreport"
+getforecast() { curl -sf "wttr.in/$LOCATION" > "$weatherreport" || exit 1 ;}
+
+# Some very particular and terse stream manipulation. We get the maximum
+# precipitation chance and the daily high and low from the downloaded file and
+# display them with coresponding emojis.
+showweather() { printf "%s" "$(sed '16q;d' "$weatherreport" |
+	grep -wo "[0-9]*%" | sort -rn | sed "s/^/☔/g;1q" | tr -d '\n')"
+sed '13q;d' "$weatherreport" | grep -o "m\\([-+]\\)*[0-9]\\+" | sed 's/+//g' | sort -n -t 'm' -k 2n | sed -e 1b -e '$!d' | tr '\n|m' ' ' | awk '{print " 🥶" $1 "°","🌞" $2 "°"}' ;}
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e less -Srf "$weatherreport" ;;
+	2) getforecast && showweather ;;
+	3) notify-send "🌈 Weather module" "\- Left click for full forecast.
+- Middle click to update forecast.
+☔: Chance of rain/snow
+🥶: Daily low
+🌞: Daily high" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+# The test if our forcecast is updated to the day. If it isn't download a new
+# weather report from wttr.in with the above function.
+[ "$(stat -c %y "$weatherreport" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] ||
+	getforecast
+
+showweather

.local/bin/statusbar/sb-internet

@@ -0,0 +1,24 @@
+#!/bin/sh
+
+# Show wifi 📶 and percent strength or 📡 if none.
+# Show 🌐 if connected to ethernet or ❎ if none.
+# Show 🔒 if a vpn connection is active
+
+case $BLOCK_BUTTON in
+	1) "$TERMINAL" -e nmtui; pkill -RTMIN+4 dwmblocks ;;
+	3) notify-send "🌐 Internet module" "\- Click to connect
+📡: no wifi connection
+📶: wifi connection with quality
+❎: no ethernet
+🌐: ethernet working
+🔒: vpn is active
+" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+case "$(cat /sys/class/net/w*/operstate 2>/dev/null)" in
+	down) wifiicon="📡 " ;;
+	up) wifiicon="$(awk '/^\s*w/ { print "📶", int($3 * 100 / 70) "% " }' /proc/net/wireless)" ;;
+esac
+
+printf "%s%s%s\n" "$wifiicon" "$(sed "s/down/❎/;s/up/🌐/" /sys/class/net/e*/operstate 2>/dev/null)" "$(sed "s/.*/🔒/" /sys/class/net/tun*/operstate 2>/dev/null)"

.local/bin/statusbar/sb-iplocate

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+# Gets your public ip address checks which country you are in and
+# displays that information in the statusbar
+#
+# https://www.maketecheasier.com/ip-address-geolocation-lookups-linux/
+
+ifinstalled "geoip" || exit
+addr="$(curl ifconfig.me 2>/dev/null)" || exit
+grep "flag: " "${XDG_DATA_HOME:-$HOME/.local/share}/larbs/emoji" | grep "$(geoiplookup "$addr" | sed 's/.*, //')" | sed "s/flag: //;s/;.*//"

.local/bin/statusbar/sb-kbselect

@@ -0,0 +1,16 @@
+#!/bin/sh
+# works on any init system
+# requirements: dmenu, xorg-setxkbmap
+kb="$(setxkbmap -query | grep -oP 'layout:\s*\K\w+')" || exit 1
+
+case $BLOCK_BUTTON in
+	1) kb_choice="$(awk '/! layout/{flag=1; next} /! variant/{flag=0} flag {print $2, "- " $1}' /usr/share/X11/xkb/rules/base.lst | dmenu -l 15)"
+	kb="$(echo "$kb_choice" | awk '{print $3}')"
+	setxkbmap "$kb"
+	pkill -RTMIN+30 "${STATUSBAR:-i3blocks}";;
+	3) notify-send "⌨  Keyboard/language module" "$(printf "%s" "\- Current layout: $(setxkbmap -query | grep -oP 'layout:\s*\K\w+')")
+- Left click to change keyboard.";;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+echo "$kb"

.local/bin/statusbar/sb-memory

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+case $BLOCK_BUTTON in
+	1) notify-send "🧠 Memory hogs" "$(ps axch -o cmd:15,%mem --sort=-%mem | head)" ;;
+	2) setsid -f "$TERMINAL" -e htop ;;
+	3) notify-send "🧠 Memory module" "\- Shows Memory Used/Total.
+- Click to show memory hogs.
+- Middle click to open htop." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+free --mebi | sed -n '2{p;q}' | awk '{printf ("🧠%2.2fGiB/%2.2fGiB\n", ( $3 / 1024), ($2 / 1024))}'

.local/bin/statusbar/sb-moonphase

@@ -0,0 +1,37 @@
+#!/bin/sh
+
+# Shows the current moon phase.
+
+moonfile="${XDG_DATA_HOME:-$HOME/.local/share}/moonphase"
+
+[ "$(stat -c %y "$moonfile" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] ||
+	{ curl -sf "wttr.in/?format=%m" > "$moonfile" || exit 1 ;}
+
+icon="$(cat "$moonfile")"
+
+case "$icon" in
+	🌑) name="New" ;;
+	🌒) name="Waxing Crescent" ;;
+	🌓) name="First Quarter" ;;
+	🌔) name="Waxing Gibbous" ;;
+	🌕) name="Full" ;;
+	🌖) name="Waning Gibbous" ;;
+	🌗) name="Last Quarter" ;;
+	🌘) name="Waning Crescent" ;;
+	*) exit 1 ;;
+esac
+
+echo "${icon-?}"
+
+case $BLOCK_BUTTON in
+	3) notify-send "🌜 Moon phase module" "Displays current moon phase.
+- 🌑: New
+- 🌒: Waxing Crescent
+- 🌓: First Quarter
+- 🌔: Waxing Gibbous
+- 🌕: Full
+- 🌖: Waning Gibbous
+- 🌗: Last Quarter
+- 🌘: Waning Crescent" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac

.local/bin/statusbar/sb-mpdup

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+# This loop will update the mpd statusbar module whenever a command changes the
+# music player's status. mpd must be running on X's start for this to work.
+
+while : ; do
+	mpc idle >/dev/null && kill -45 "$(pidof "${STATUSBAR:-i3blocks}")" || break
+done

.local/bin/statusbar/sb-music

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+filter() { mpc | sed "/^volume:/d;s/\\&/&/g;s/\\[paused\\].*/⏸/g;/\\[playing\\].*/d;/^ERROR/Q" | paste -sd ' ' -| awk '{ if($0>0) print "🎶 " $0}';}
+
+pidof -x sb-mpdup >/dev/null 2>&1 || sb-mpdup >/dev/null 2>&1 &
+
+case $BLOCK_BUTTON in
+	1) mpc status | filter ; setsid -f "$TERMINAL" -e ncmpcpp ;;  # right click, pause/unpause
+	2) mpc toggle | filter ;;  # right click, pause/unpause
+	3) mpc status | filter ; notify-send "🎵 Music module" "\- Shows mpd song playing.
+- ⏸ when paused.
+- Left click opens ncmpcpp.
+- Middle click pauses.
+- Scroll changes track.";;  # right click, pause/unpause
+	4) mpc prev   | filter ;;  # scroll up, previous
+	5) mpc next   | filter ;;  # scroll down, next
+	6) mpc status | filter ; "$TERMINAL" -e "$EDITOR" "$0" ;;
+	*) mpc status | filter ;;
+esac

.local/bin/statusbar/sb-nettraf

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+# Module showing network traffic. Shows how much data has been received (RX) or
+# transmitted (TX) since the previous time this script ran. So if run every
+# second, gives network traffic per second.
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e bmon ;;
+	3) notify-send "🌐 Network traffic module" "🔻: Traffic received
+🔺: Traffic transmitted" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+update() {
+    sum=0
+    for arg; do
+        read -r i < "$arg"
+        sum=$(( sum + i ))
+    done
+    cache=${XDG_CACHE_HOME:-$HOME/.cache}/${1##*/}
+    [ -f "$cache" ] && read -r old < "$cache" || old=0
+    printf %d\\n "$sum" > "$cache"
+    printf %d\\n $(( sum - old ))
+}
+
+rx=$(update /sys/class/net/[ew]*/statistics/rx_bytes)
+tx=$(update /sys/class/net/[ew]*/statistics/tx_bytes)
+
+printf "🔻%4sB 🔺%4sB\\n" $(numfmt --to=iec $rx) $(numfmt --to=iec $tx)

.local/bin/statusbar/sb-news

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# Displays number of unread news items and an loading icon if updating.
+# When clicked, brings up `newsboat`.
+
+case $BLOCK_BUTTON in
+    1) setsid "$TERMINAL" -e newsboat ;;
+    2) setsid -f newsup >/dev/null exit ;;
+    3) notify-send "📰 News module" "\- Shows unread news items
+- Shows 🔃 if updating with \`newsup\`
+- Left click opens newsboat
+- Middle click syncs RSS feeds
+<b>Note:</b> Only one instance of newsboat (including updates) may be running at a time." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+ cat /tmp/newsupdate 2>/dev/null || echo "$(newsboat -x print-unread | awk '{ if($1>0) print "📰" $1}')$(cat "${XDG_CONFIG_HOME:-$HOME/.config}"/newsboat/.update 2>/dev/null)"

.local/bin/statusbar/sb-pacpackages

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+# Displays number of upgradeable packages.
+# For this to work, have a `pacman -Sy` command run in the background as a
+# cronjob every so often as root. This script will then read those packages.
+# When clicked, it will run an upgrade via pacman.
+#
+# Add the following text as a file in /usr/share/libalpm/hooks/statusbar.hook:
+#
+# [Trigger]
+# Operation = Upgrade
+# Type = Package
+# Target = *
+#
+# [Action]
+# Description = Updating statusbar...
+# When = PostTransaction
+# Exec = /usr/bin/pkill -RTMIN+8 dwmblocks # Or i3blocks if using i3.
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e sb-popupgrade ;;
+	2) notify-send "$(/usr/bin/pacman -Qu)" ;;
+	3) notify-send "🎁 Upgrade module" "📦: number of upgradable packages
+- Left click to upgrade packages
+- Middle click to show upgradable packages" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+pacman -Qu | grep -Fcv "[ignored]" | sed "s/^/📦/;s/^📦0$//g"

.local/bin/statusbar/sb-popupgrade

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+printf "Beginning upgrade.\\n"
+
+yay -Syu
+
+printf "\\nUpgrade complete.\\nPress <Enter> to exit window.\\n\\n"
+read -r _
+
+i3 restart

.local/bin/statusbar/sb-price

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+# Usage:
+#	price <url> <Name of currency> <icon>
+#	price bat "Basic Attention Token" 🦁
+# When the name of the currency is multi-word, put it in quotes.
+
+[ -z "$3" ] && exit 1
+interval="@14d"	# History contained in chart preceded by '@' (7d = 7 days)
+dir="${XDG_DATA_HOME:-$HOME/.local/share}/crypto-prices"
+pricefile="$dir/$1"
+chartfile="$dir/$1-chart"
+
+updateprice() { ping -q -c 1 example.org >/dev/null 2>&1 &&
+	curl -s "rate.sx/1$1" > "$pricefile" &&
+	curl -s "rate.sx/$1$interval" > "$chartfile" ;}
+
+[ -d "$dir" ] || mkdir -p "$dir"
+
+[ "$(stat -c %x "$pricefile" 2>/dev/null | cut -d' ' -f1)" != "$(date '+%Y-%m-%d')" ] &&
+	updateprice "$1"
+
+case $BLOCK_BUTTON in
+	1) setsid "$TERMINAL" -e less -Srf "$chartfile" ;;
+	2) notify-send -u low "$3 Updating..." "Updating $2 price..."
+		updateprice "$1" && notify-send "$3 Update complete." "$2 price is now
+\$$(cat "$pricefile")" ;;
+	3) uptime="$(date -d "$(stat -c %x "$pricefile")" '+%D at %T' | sed "s|$(date '+%D')|Today|")"
+		notify-send "$3 $2 module" "\- <b>Exact price: \$$(cat "$pricefile")</b>
+- Left click for chart of changes.
+- Middle click to update.
+- Shows 🔃 if updating prices.
+- <b>Last updated:
+	$uptime</b>" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+printf "$3$%0.2f" "$(cat "$pricefile")"

.local/bin/statusbar/sb-tasks

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+# Originally by Andr3as07 <https://github.com/Andr3as07>
+# Some changes by Luke
+# Rebuild by Tenyun
+
+# This block displays the number running background tasks.  Requires tsp.
+
+num=$(tsp -l | awk -v numr=0 -v numq=0 '{if (/running/)numr++; if (/queued/)numq++} END{print numr+numq"("numq")"}')
+
+# Handle mouse clicks
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e tsp -l ;;
+	3) notify-send "Tasks module" "🤖: number of running/queued background tasks
+- Left click opens tsp" ;; # Right click
+	2) $EDITOR "$0" ;; # Middle click
+esac
+
+[ "$num" != "0(0)" ] &&
+	echo "🤖$num"

.local/bin/statusbar/sb-torrent

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+transmission-remote -l | grep % |
+	sed " # The letters are for sorting and will not appear.
+	s/.*Stopped.*/A 🛑/;
+	s/.*Seeding.*/Z 🌱/;
+	s/.*100%.*/N ✅/;
+	s/.*Idle.*/B 🕰️/;
+	s/.*Uploading.*/L ⬆️/;
+	s/.*%.*/M ⬇️/" |
+		sort -h | uniq -c | awk '{print $3 $1}' | paste -sd ' ' -
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e tremc ;;
+	2) td-toggle ;;
+	3) notify-send "🌱 Torrent module" "\- Left click to open tremc.
+- Middle click to toggle transmission.
+- Shift click to edit script.
+Module shows number of torrents:
+🛑: paused
+🕰: idle (seeds needed)
+🔼: uploading (unfinished)
+🔽: downloading
+✅: done
+🌱: done and seeding" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac

.local/bin/statusbar/sb-volume

@@ -0,0 +1,28 @@
+#!/bin/sh
+
+# Prints the current volume or 🔇 if muted.
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e pulsemixer ;;
+	2) pamixer -t ;;
+	4) pamixer --allow-boost -i 1 ;;
+	5) pamixer --allow-boost -d 1 ;;
+	3) notify-send "📢 Volume module" "\- Shows volume 🔊, 🔇 if muted.
+- Middle click to mute.
+- Scroll to change." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+[ $(pamixer --get-mute) = true ] && echo 🔇 && exit
+
+vol="$(pamixer --get-volume)"
+
+if [ "$vol" -gt "70" ]; then
+	icon="🔊"
+elif [ "$vol" -lt "30" ]; then
+	icon="🔈"
+else
+	icon="🔉"
+fi
+
+echo "$icon$vol%"

.local/bin/sysact

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+# A dmenu wrapper script for system functions.
+
+# For non-systemd init systems.
+case "$(readlink -f /sbin/init)" in
+	*runit*) hib="doas_askpass zzz" ;;
+	*openrc*) hib="loginctl suspend" ; reb="loginctl reboot"; shut="loginctl poweroff";;
+esac
+
+cmds="\
+🔒 lock		slock
+🐻 hibernate	${hib:-doas_askpass systemctl suspend}
+🔃 reboot	${reb:-doas_askpass reboot}
+🖥  shutdown	${shut:-doas_askpass shutdown -h now}"
+
+choice="$(echo "$cmds" | cut -d'	' -f 1 | dmenu)" || exit 1
+
+`echo "$cmds" | grep "^$choice	" | cut -d '	' -f2-`

.local/bin/td-toggle

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+# If transmission-daemon is running, will ask to kill, else will ask to start.
+
+if pidof transmission-daemon >/dev/null ;
+then
+	[ "$(printf "No\\nYes" | dmenu -i -p "Turn off transmission-daemon?")" = "Yes" ] && killall transmission-daemon && notify-send "transmission-daemon disabled."
+else
+	ifinstalled transmission-cli || exit
+	[ "$(printf "No\\nYes" | dmenu -i -p "Turn on transmission daemon?")" = "Yes" ] && transmission-daemon && notify-send "tranmission-daemon enabled."
+fi
+sleep 3 && pkill -RTMIN+7 "${STATUSBAR:-dwmblocks}"

.local/bin/unmounter

@@ -0,0 +1,28 @@
+#!/bin/sh
+
+# Unmount USB drives or Android phones. Replaces the older `dmenuumount`. Fewer
+# prompt and also de-decrypts LUKS drives that are unmounted.
+
+set -e
+
+mounteddroids="$(grep simple-mtpfs /etc/mtab | awk '{print "📱" $2}')"
+lsblkoutput="$(lsblk -nrpo "name,type,size,mountpoint")"
+mounteddrives="$(echo "$lsblkoutput" | awk '($2=="part"||$2="crypt")&&$4!~/\/boot|\/home$|SWAP/&&length($4)>1{printf "💾%s (%s)\n",$4,$3}')"
+
+allunmountable="$(echo "$mounteddroids
+$mounteddrives" | sed "/^$/d;s/ *$//")"
+test -n "$allunmountable"
+
+chosen="$(echo "$allunmountable" | dmenu -i -p "Unmount which drive?")"
+chosen="${chosen%% *}"
+test -n "$chosen"
+
+sudo -A umount -l "/${chosen#*/}"
+notify-send "Device unmounted." "$chosen has been unmounted."
+
+# Close the chosen drive if decrypted.
+cryptid="$(echo "$lsblkoutput" | grep "/${chosen#*/}$")"
+cryptid="${cryptid%% *}"
+test -b /dev/mapper/"${cryptid##*/}"
+sudo -A cryptsetup close "$cryptid"
+notify-send "🔒Device dencryption closed." "Drive is now securely locked again."